Getting Started with the TS2 Performance Steam CleanerUpdated 8 days ago

How great that you're the owner of the TS2 Performance Steam Cleaner! With this powerhouse at home, cleaning becomes much easier and more fun. Follow these simple steps to get started right away and become a real Steam Expert! Don't forget to always read the full manual before use.

Ready to start?

Let's prepare the steam cleaner for use!

1. Fill the steam cleaner: Fill the steam cleaner with a maximum of 3 measuring cups of water (that's 1.6 litres in total). Then tighten the cap firmly so the steam can't escape later.
2. Let the steam cleaner heat up: Plug it in and press the button. Once the light turns from red to blue, the steam cleaner has heated up and you can start steaming!

Tip: Are you steaming and the light goes from blue to red? That means the heating element is turning on again. You can simply keep steaming!

Start steaming!

Now that the steam cleaner has heated up, the real work can begin. Let's start with an easy surface: the countertop.

1. Use the triangle brush: Place the triangle brush on the steam cleaner. This attachment is suitable for evenly steaming larger parts of the countertop clean.
2. Steam the surface gently clean: Move the steam cleaner slowly across the countertop. Pay extra attention to spots with grease, sauce residue or caked-on dirt.
3. Clean edges and seams with the nylon brush: Use the nylon brush for edges, seams, the rim of the sink and the area around the tap. This lets you clean more precisely where dirt tends to build up.
4. Wipe the countertop dry: After steaming, wipe the surface clean and dry with a clean microfiber cloth. This removes loosened dirt and prevents streaks or damp spots.

Your countertop doesn't just look clean, it's actually hygienically cleaned by the hot steam, without chemical agents.

Important to remember

Spray excess water out of the steam cleaner Before you start steaming, it's important to first spray out any water from the steam cleaner.
Keep moving Never hold the steam nozzle still on one spot for too long. By keeping moving, you prevent the surface from being damaged by the heat.
Wipe immediately Steam loosens dirt, but you still need to wipe it away! Use the included drying cloth to absorb the loosened dirt and condensation moisture right after steaming. This prevents the dirt from simply drying back on.
Test first Not entirely sure if a surface can be steamed? Always try the steam cleaner first on a small, inconspicuous spot before tackling the whole surface.

Done steaming?

Take good care of your steam cleaner, and it'll take good care of you! With a little love and the right maintenance you keep it in top shape.

Let it cool down safely Always let the device cool down completely after your cleaning session. This is very important before you open the cap to refill water, and before you store the steam cleaner away in the cupboard.
Empty the steam cleaner Done cleaning? Then always empty the steam cleaner after use. This keeps the water reservoir fresh.
Descale monthly Just like your coffee machine, the steam cleaner doesn't like limescale. To prevent limescale buildup in the heating element and keep the steam power maximum, it's important to descale the steam cleaner monthly. This is the key to a long and happy life for your TS2!

Read here how to do that: How to descale the steam cleaner.

Now you're ready! Start the deep clean of your home!

Now that you're a steam expert, you can start steaming your whole house! We have various Help Center articles where you can see how to clean specific surfaces, such as:

You can find all articles here: Help Center user tips.

Was this article helpful?

Yes