Get started with the TS CompactUpdated 6 days ago

1. Refilling water

Remove the safety cap and fill the tank with approximately 900 ml of water. Then reattach the cap securely and plug the device into the power outlet. Does it feel too heavy in your hand? Then fill the tank with less water. You can actually continuously refill this handheld steamer while steaming.

2. Choose your attachment

Attach the desired nozzle. Then turn on the steam cleaner by pressing and holding the steam button and sliding it upwards. When the indicator light flashes 5 times, the device is heating up. As soon as the light is constantly on (after ±10 seconds), the device is ready for use. During the first use, a small amount of water may be released – this is completely normal.

3. Continuous steaming

To steam continuously without having to hold the button yourself, press the button and slide it from top to bottom. To interrupt continuous steaming, press the button and slide it upwards.

4. Wet and dry mode

Use the steam selection button to switch between wet and dry mode:

Wet mode – more moisture, for thorough cleaning such as dirty grout.
Dry mode – higher temperature, less moisture, for disinfection or floors.

5. Ready to steam!

Hold the nozzle at a distance of about 1 to 3 centimeters from the surface during cleaning. This gives the steam power optimal space to soak off the dirt!

Was this article helpful?

Yes